EVA PRO
EVA PRO is applied as a liquid and dries into an elastic film. Two coats build a barrier up to 200 microns thick that takes the scratches, dust, paint, foam and mortar splashes of an active site instead of the finished surface underneath.
When the work is done the film is peeled off in a single continuous sheet — no solvents, no scraping, no adhesive residue left behind.
- Goes on with a roller. A standard velour roller or an airless sprayer; no primer and no special tooling.
- Blue while wet. The colour shows exactly where the coat has already been laid, then dries to a matt translucent film.
- Up to 200 microns. Two coats build a reinforced barrier; one dense coat is enough on horizontal surfaces.
- Peels off clean. Comes away as one elastic sheet without damaging the surface or leaving tack behind.
- Holds for six months. Keeps its protective properties for up to 6 months once applied.
- Vertical surfaces
- Two thin coats, to avoid runs.
- Horizontal surfaces
- One dense coat.
- Coverage
- 200–250 g/m² on average.
- Drying
- Up to 24 hours, depending on temperature and coat thickness.
- Not for bare wood. Do not apply to untreated wooden surfaces.
- Always test first. Before covering a large area, apply a test patch and check the result on that particular surface.
- If it freezes. The product fully recovers: warm it in a water bath to +70…80 °C and stir thoroughly.
- Article
- ALB-CARE-EVA-1L / ALB-CARE-EVA-5L
- Product type
- Peelable liquid protective film
- Packaging
- 1 litre / 5 litres
- Suitable for
- Acrylic, engineered and natural stone, ceramics, mirrors, glass, PVC, porcelain stoneware, marble, metal profile
- Protects against
- Scratches, chips, construction dust, paint, foam, cement and plaster mortars
- Coverage
- 200–250 g/m²
- Film thickness
- Up to 200 microns in two coats
- Colour
- Blue when wet, matt translucent once dry
- Drying time
- Up to 24 hours
- Protection period
- Up to 6 months once applied
- Application
- Velour roller or airless sprayer
- Shelf life
- 3 years
- Availability
- In stock
- Supply
- Supplied under the ALBELA brand
In stock. Send a request and we will reply with an invoice stating the price, quantity and shipping terms.
What people usually ask
How long does EVA PRO take?
The item is made to order, with a lead time of 20 working days from receipt of payment. Once it is ready, shipment follows within 2 working days: collection from Kirishi, 32 Prospekt Pobedy, or a carrier of your choice at its own rates.
What is the item made of?
Acrylic solid surface — aluminium trihydrate in a PMMA acrylic resin binder, with no styrene. The material is non-porous, coloured throughout, absorbs no moisture and releases no volatile compounds at domestic temperatures.
Can the size, colour or lighting be changed?
Yes — every item is made for a specific order, so dimensions, finish and lighting are agreed before production starts. Changes affect the price and are confirmed when the invoice is issued.
What should I do about a scratch or a chip?
Solid surface is restored by sanding without removing the item. Light scratches on a matt finish can be taken out with fine-grit sanding; deep damage and gloss finishes are better left to a specialist.
What is the warranty and can the item be returned?
The warranty period is 2 years, with an additional 8-year limited warranty on structural integrity. The service life is 10 years. Items with a manufacturing defect are returned or exchanged at our expense. Items of satisfactory quality are returnable only by prior written agreement, with the original packaging intact and at the buyer's expense. Made-to-measure items cannot be returned or exchanged in the absence of a defect.