LEVITAS PLUS
A monolith with a 100 mm edge and through towel cut-outs — the holder is built into the slab itself
Levitas Plus is a solid surface monolith with a 100 mm edge, machined with through cut-outs: a towel passes through them and stays in place without hooks, rails or rings. The opening runs through the full height of the edge, so it reads as part of the architecture of the slab rather than as an accessory added to it.
In the Levitas Plus LED version a continuous light line runs along the top of the edge and traces around the cut-outs, underlining their geometry. There can be one cut-out or two; the side is specified when ordering.
- Through cut-outs. The towel passes through the full height of the edge — the holder is built into the slab and nothing appears on the wall.
- One or two cut-outs. The side is specified when ordering. A cut-out on the front edge is preferable: water from the towel runs clear of the cabinet body.
- Light line along the top of the edge. In the Levitas Plus LED version the light traces around the cut-outs, IP65 rated.
Lighting off and on — switch to see the difference.
- SKU
- ALB-CTP-LVP
- Price
- $190 for 600 × 450 mm
- Product type
- Wall-hung countertop without basin
- Material
- Solid surface acrylic stone (PMMA + ATH)
- Visible edge height
- 100 mm (other heights on request)
- Depth
- 400–600 mm, in 50 mm steps
- Length
- 600–2400 mm, in 50 mm steps; above 600 mm, 80 mm wide ribs, one per 600 mm of span
- Surface finish
- Matt or gloss, same price
- Colour
- Base white; RAL colours on request
- Lighting (LED version)
- A continuous light line inside the edge along 3 sides (front and both ends), IP65; 12 or 24 V LEDs, 3000 K when the light passes through the stone or 6000 K for a visible LED; the LED module and power supply (IP20 or IP65, depending on location) are included, the mains cable is not
- Towel cut-outs
- One or two; the side is specified when ordering, the front edge is recommended
- Basin
- Not included in the price, quoted separately
- Supplied with
- Countertop, packaging; in the LED version also the LED module and power supply
- Availability
- In stock
- Lead time
- Shipped from stock
- Production
- Kirishi, Leningrad Region, Russia
The item is made to order. Send us a request and we will issue an invoice-offer with the exact price, lead time and shipping terms. We normally reply within one working day.
What people usually ask
How long does LEVITAS PLUS take?
The item is made to order, with a lead time of 20 working days from receipt of payment. Once it is ready, shipment follows within 2 working days: collection from Kirishi, 32 Prospekt Pobedy, or a carrier of your choice at its own rates.
What is the item made of?
Acrylic solid surface — aluminium trihydrate in a PMMA acrylic resin binder, with no styrene. The material is non-porous, coloured throughout, absorbs no moisture and releases no volatile compounds at domestic temperatures.
Can the size, colour or lighting be changed?
Yes — every item is made for a specific order, so dimensions, finish and lighting are agreed before production starts. Changes affect the price and are confirmed when the invoice is issued.
What should I do about a scratch or a chip?
Solid surface is restored by sanding without removing the item. Light scratches on a matt finish can be taken out with fine-grit sanding; deep damage and gloss finishes are better left to a specialist.
What is the warranty and can the item be returned?
The warranty period is 2 years, with an additional 8-year limited warranty on structural integrity. The service life is 10 years. Items with a manufacturing defect are returned or exchanged at our expense. Items of satisfactory quality are returnable only by prior written agreement, with the original packaging intact and at the buyer's expense. Made-to-measure items cannot be returned or exchanged in the absence of a defect.