MAGIC VISIONsquare free-standing solid surface bioethanol fireplace
A square island fireplace of 900 × 900 mm — the larger body in the range. The ultra-white solid surface portal is wrapped in a horizontal band of brushed AISI 304 steel, with concealed LED lighting along the plinth below. The flame sits inside a four-sided tempered glass cube and reads equally well from every side, so the fireplace is meant to stand in the middle of a room.
MAGIC VISION differs from GRAND VISTA in the geometry of its body: 900 × 900 mm instead of 900 × 450. It is a self-contained volume tied neither to a wall nor to the axis of the furniture — it goes in the centre of a lounge area, between seating groups, or as an accent in a large room with a high ceiling.
The burner and the automation are the same as in GRAND VISTA: a 400 mm fire line along the centre of the top surface, a 450 mm glass cube, natural convection. The tank grows to 5 litres and the body weighs 86 kg.
- One-Touch ignition. The microprocessor unit brings the burner up to its working mode — no open flame or matches involved.
- Flame control. Two to three flame levels, from a low steady line of fire to full height.
- Three control channels. Touch display on the body, a 433 MHz RF remote and Wi-Fi via the Tuya / Smart Life app.
- Auto-filling. The built-in pump draws fuel straight from the canister and stops at the upper level sensor.
- Plinth lighting. A concealed linear LED module, warm 3000K light along the base contour.
Seven protection circuits are included as standard and work independently of each other.
- Flame control
- K-type thermocouple in a protective sleeve. If the flame goes out or is blown off, the fuel supply is cut within 15–20 seconds
- Tank level
- Two reed float sensors: the lower one protects the pump from running dry, the upper one stops filling when the tank is full
- Tilt and shock
- Three-axis accelerometer. Emergency shutdown on impact or a tilt of more than 5–10° from horizontal
- Combustion chamber temperature
- A high-temperature thermocouple blocks restart until the nozzle has cooled to a safe temperature
- Fuel tank temperature
- A digital sensor keeps the tank from heating above 45–50 °C
- Tray leak
- Conductometric electrodes at the bottom of the sealed tray detect spilled fuel
- Filler lock
- An electromagnetic lock prevents the filler neck from being opened while the unit runs and until it has cooled down
- CO₂ sensor — option
- An NDIR infrared sensor draws room air through the lower panel and shuts the fireplace down if the carbon dioxide concentration rises above the limit. Price on request
Nominal dimensions in millimetres, for free-standing installation.
- Solid surface panel
- 12 mm
- Optiwhite glass
- 6 mm
- Body geometry tolerance
- ±1 mm
- Net weight
- 86 kg
- Gross weight
- 107 kg
The tank holds 5 litres and the working fill is one 4.5 litre ALBELA canister, which gives about 5.5 hours of continuous burning at roughly 0.8 l/h. The calculated heat output at that consumption is about 4.7 kW; the fireplace is designed as an interior object rather than as a primary heat source.
The room should be at least 60 m³ with natural or forced ventilation. Use only certified high-purity denatured bioethanol (96–96.6 %); other alcohols and flammable liquids must not be used.
- Article
- ALB-FRP-MGV
- Product type
- Free-standing automatic bioethanol fireplace, island installation, square body
- Portal material
- Solid surface (acrylic), 12 mm sheet, ultra-white matt
- Decorative insert
- AISI 304 stainless steel, brushed band running around the body, laser-engraved ALBELA
- Protective screen
- Four-sided tempered Optiwhite glass cube 6 mm, 360° view (quartz glass optional)
- Dimensions (W × D × H)
- 900 × 900 × 930 mm
- Weight
- 86 kg
- Weight with packaging
- 107 kg
- Fuel tank capacity
- 5 l
- Working fill
- ALBELA 4.5 l canister
- Burn time
- Up to 5.5 hours per 4.5 l canister
- Fuel consumption
- About 0.8 l/h
- Heat output
- About 4.7 kW (calculated from fuel consumption)
- Fuel
- Denatured bioethanol, 96–96.6 %
- Burner type
- Automatic processor-controlled vapour burner module
- Flame control
- 2–3 levels
- Control
- Touch display, 433 MHz RF remote, Wi-Fi (Tuya / Smart Life)
- Power supply
- 220–240 V, 50 Hz; under 40 W while burning
- Plinth lighting
- Concealed linear LED module, 3000K
- Sensors included
- Flame control, fuel level (2 points), tilt and shock, combustion chamber temperature, tank temperature, tray leak, filler lock
- Auto-filling
- Built-in pump draws fuel from an external canister and stops at the upper level sensor
- Options
- CO₂ sensor (NDIR), quartz glass — price on request
- Room requirements
- From 60 m³ with natural or forced ventilation; no flue required
- Availability
- Made to order
- Lead time
- 20 working days
- Warranty
- Burner module — 2 years; body — 2 years full, 8 years on structural integrity; service life 10 years
- Production
- Body — Kirishi, Leningrad Region; burner module — OEM Auto-Burner Gen.4 platform
Made to order, 20 working days. Leave a request and we will send a quote with the price, lead time and shipping terms.
What people usually ask
How long does MAGIC VISION take?
The item is made to order, with a lead time of 20 working days from receipt of payment. Once it is ready, shipment follows within 2 working days: collection from Kirishi, 32 Prospekt Pobedy, or a carrier of your choice at its own rates.
What is the item made of?
Acrylic solid surface — aluminium trihydrate in a PMMA acrylic resin binder, with no styrene. The material is non-porous, coloured throughout, absorbs no moisture and releases no volatile compounds at domestic temperatures.
Can the size, colour or lighting be changed?
Yes — every item is made for a specific order, so dimensions, finish and lighting are agreed before production starts. Changes affect the price and are confirmed when the invoice is issued.
What should I do about a scratch or a chip?
Solid surface is restored by sanding without removing the item. Light scratches on a matt finish can be taken out with fine-grit sanding; deep damage and gloss finishes are better left to a specialist.
What is the warranty and can the item be returned?
The warranty period is 2 years, with an additional 8-year limited warranty on structural integrity. The service life is 10 years. Items with a manufacturing defect are returned or exchanged at our expense. Items of satisfactory quality are returnable only by prior written agreement, with the original packaging intact and at the buyer's expense. Made-to-measure items cannot be returned or exchanged in the absence of a defect.