GRAND VISTAfree-standing automatic solid surface bioethanol fireplace
A free-standing island fireplace: an ultra-white solid surface portal, a vertical brushed AISI 304 steel insert and concealed LED lighting in the plinth that makes the body appear to float. The flame is enclosed by a four-sided tempered glass cube and stays visible from every side.
The burner module is recessed into the stone portal and the 400 mm fire line runs along the centre of the top surface. The 450 mm glass cube encloses the flame on four sides and works on natural convection: air enters from below, combustion products rise, and the glass stays clear of condensation and soot.
The fireplace is designed for island placement — in the middle of a lounge area or between seating groups, with no wall behind it. Bioethanol vapour burns without odour, smoke or soot, so no flue, gas line or extraction duct is needed: a 220 V socket is enough.
- One-Touch ignition. The microprocessor unit brings the burner up to its working mode — no open flame or matches involved.
- Flame control. Two to three flame levels, from a low steady line of fire to full height.
- Three control channels. Touch display on the body, a 433 MHz RF remote and Wi-Fi via the Tuya / Smart Life app.
- Auto-filling. The built-in pump draws fuel straight from the canister through a hose and stops at the upper level sensor — no overfilling, no spillage.
- Plinth lighting. A concealed linear LED module, warm 3000K light along the base contour.
Seven protection circuits are included as standard and work independently of each other.
- Flame control
- K-type thermocouple in a protective sleeve. If the flame goes out or is blown off, the fuel supply is cut within 15–20 seconds
- Tank level
- Two reed float sensors: the lower one protects the pump from running dry, the upper one stops filling when the tank is full
- Tilt and shock
- Three-axis accelerometer. Emergency shutdown on impact or a tilt of more than 5–10° from horizontal
- Combustion chamber temperature
- A high-temperature thermocouple blocks restart until the nozzle has cooled to a safe temperature
- Fuel tank temperature
- A digital sensor keeps the tank from heating above 45–50 °C
- Tray leak
- Conductometric electrodes at the bottom of the sealed tray detect spilled fuel
- Filler lock
- An electromagnetic lock prevents the filler neck from being opened while the unit runs and until it has cooled down
- CO₂ sensor — option
- An NDIR infrared sensor draws room air through the lower panel and shuts the fireplace down if the carbon dioxide concentration rises above the limit. Price on request
Nominal dimensions in millimetres, for free-standing installation.
- Solid surface panel
- 12 mm
- Optiwhite glass
- 6 mm
- Burner recess depth
- 180 mm
- Body geometry tolerance
- ±1 mm
- Net weight
- 78 kg
- Gross weight
- 96 kg
The tank holds 5 litres and the working fill is one 4.5 litre ALBELA canister, which gives about 5.5 hours of continuous burning at roughly 0.8 l/h. At that consumption the calculated heat output is roughly 4.7 kW; the fireplace is designed as an interior object rather than as a primary heat source.
The room should be at least 60 m³ with natural or forced ventilation. Use only certified high-purity denatured bioethanol (96–96.6 %); other alcohols and flammable liquids must not be used.
- Article
- ALB-FRP-GVI
- Product type
- Free-standing automatic bioethanol fireplace, island installation
- Portal material
- Solid surface (acrylic), 12 mm sheet, ultra-white matt
- Decorative insert
- AISI 304 stainless steel, brushed, laser-engraved ALBELA
- Protective screen
- Four-sided tempered Optiwhite glass cube 6 mm, 360° view (quartz glass optional)
- Dimensions (W × D × H)
- 900 × 450 × 930 mm
- Weight
- 78 kg
- Weight with packaging
- 96 kg
- Fire line length
- 400 mm
- Fuel tank capacity
- 5 l
- Working fill
- ALBELA 4.5 l canister
- Burn time
- Up to 5.5 hours per 4.5 l canister
- Fuel consumption
- About 0.8 l/h
- Heat output
- About 4.7 kW (calculated from fuel consumption)
- Fuel
- Denatured bioethanol, 96–96.6 %
- Burner type
- Automatic processor-controlled vapour burner module
- Flame control
- 2–3 levels
- Control
- Touch display, 433 MHz RF remote, Wi-Fi (Tuya / Smart Life)
- Power supply
- 220–240 V, 50 Hz; under 40 W while burning
- Plinth lighting
- Concealed linear LED module, 3000K
- Sensors included
- Flame control, fuel level (2 points), tilt and shock, combustion chamber temperature, tank temperature, tray leak, filler lock
- Auto-filling
- Built-in pump draws fuel from an external canister and stops at the upper level sensor
- Options
- CO₂ sensor (NDIR), quartz glass — price on request
- Room requirements
- From 60 m³ with natural or forced ventilation; no flue required
- Availability
- Made to order
- Lead time
- 20 working days
- Warranty
- Burner module — 2 years; body — 2 years full, 8 years on structural integrity; service life 10 years
- Production
- Body — Kirishi, Leningrad Region; burner module — OEM Auto-Burner Gen.4 platform
Made to order, 20 working days. Leave a request and we will send a quote with the price, lead time and shipping terms.