PURE
A slab with a 20 mm edge and longitudinal cut-outs: the towel tucks into the cut-out and stays put without hooks or rails
Pure is the same monolithic slab with a 20 mm edge, with longitudinal cut-outs machined through it: a towel tucks into the opening and stays in place without hooks, rails or rings. Nothing is fixed to the wall and nothing protrudes from the plane — the holder becomes part of the countertop itself.
The Pure-LED version adds a light line inside the edge along the front and both ends. There can be two cut-outs or one; pricing differs, and the switch above the table shows both options.
- Integrated cut-outs. The towel holder is built into the slab, so no extra hardware appears on the wall.
- One or two cut-outs. The cut-out is machined along the front edge. A cut-out on the wall side is strongly discouraged: water from the towel runs onto the cabinet body and into the wall junction.
- Light line. In the Pure-LED version, continuous lighting inside the edge along the front and both ends, IP65 rated.
Lighting off and on — switch to see the difference.
- SKU
- ALB-CTP-PUR
- Price
- $120 for 600 × 450 mm
- Product type
- Wall-hung countertop without basin
- Material
- Solid surface acrylic stone (PMMA + ATH)
- Visible edge height
- 20 mm (other heights on request)
- Depth
- 400–600 mm, in 50 mm steps
- Length
- 600–2400 mm, in 50 mm steps; above 600 mm, 80 mm wide ribs, one per 600 mm of span
- Surface finish
- Matt or gloss, same price
- Colour
- Base white; RAL colours on request
- Lighting (LED version)
- A continuous light line inside the edge along 3 sides (front and both ends), IP65; 12 or 24 V LEDs, 3000 K when the light passes through the stone or 6000 K for a visible LED; the LED module and power supply (IP20 or IP65, depending on location) are included, the mains cable is not
- Towel cut-outs
- One or two; the side is specified when ordering, the front edge is recommended
- Basin
- Not included in the price, quoted separately
- Supplied with
- Countertop, packaging; in the LED version also the LED module and power supply
- Availability
- In stock
- Lead time
- Shipped from stock
- Production
- Kirishi, Leningrad Region, Russia
The item is made to order. Send us a request and we will issue an invoice-offer with the exact price, lead time and shipping terms. We normally reply within one working day.
What people usually ask
How long does PURE take?
The item is made to order, with a lead time of 20 working days from receipt of payment. Once it is ready, shipment follows within 2 working days: collection from Kirishi, 32 Prospekt Pobedy, or a carrier of your choice at its own rates.
What is the item made of?
Acrylic solid surface — aluminium trihydrate in a PMMA acrylic resin binder, with no styrene. The material is non-porous, coloured throughout, absorbs no moisture and releases no volatile compounds at domestic temperatures.
Can the size, colour or lighting be changed?
Yes — every item is made for a specific order, so dimensions, finish and lighting are agreed before production starts. Changes affect the price and are confirmed when the invoice is issued.
What should I do about a scratch or a chip?
Solid surface is restored by sanding without removing the item. Light scratches on a matt finish can be taken out with fine-grit sanding; deep damage and gloss finishes are better left to a specialist.
What is the warranty and can the item be returned?
The warranty period is 2 years, with an additional 8-year limited warranty on structural integrity. The service life is 10 years. Items with a manufacturing defect are returned or exchanged at our expense. Items of satisfactory quality are returnable only by prior written agreement, with the original packaging intact and at the buyer's expense. Made-to-measure items cannot be returned or exchanged in the absence of a defect.